Local Configurations 93
Figure 5-59
5.4.5 Calling OSD Menu
For the coaxial camera, you can call the OSD menu through the Expanded PTZ Control Panel.
See Figure 5-58.
On the Expanded PTZ Control Panel, click . Step 1
The MENU OPERATION interface is displayed. See Figure 5-60.
Figure 5-60
Click Enter. Step 2
The OSD menu is displayed. See Figure 5-61.
Figure 5-61
On the MENU OPERATION interface, click the arrow button to select the onscreen Step 3
parameters.
Click Enter to complete the settings. Step 4