Local Configurations 188
Table 5-49
Click Apply to complete the settings. Step 3
5.12.2 Searching for Detected Faces
To comply with relevant regulations, the faces have received fuzzy processing.
Select Main Menu > FACE DETECT > SMART SEARCH. Step 1
The SMART SEARCH interface is displayed. See Figure 5-157.
Figure 5-157
In the Begin Time box and End Time box, enter the time. Step 2
Select the display by clicking Graph or clicking List. Step 3
Click Search. Step 4
The faces searched in the defined period are displayed. See Figure 5-158 or Figure
5-159.
Click Export to export the search results to the connected USB device.
To Next Page
Loading...
Need help?
General
