EasyManuals Logo

Dahua Technology XVR4 Series User Manual

Dahua Technology XVR4 Series
330 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
Local Configurations 40
Configure the protection parameters for password. For details, see Table 5-2. Step 5
After configuration, if you forget the password for admin user, you can reset the
password through the reserved email address or security questions. For details about
resetting the password, see "5.1.3 Resetting Password."
If you do not want to configure the settings, disable the email address and security
questions functions on the interface.
Password
Protection Mode
Description
Email Address
Enter the reserved email address.
In the Email Address box, enter an email address for password
reset. If you forget the password, enter the security code that you will
get from this reserved email address to reset the password of admin.
Security
Questions
Configure the security questions and answers.
If you forget the password, enter the answers to the questions can
make you reset the password.
If you want to configure the email or security questions fucntion later or you want to
change the configurations, select Main Menu > ACCOUNT > USER.
Table 5-2
Click Save to complete the settings. Step 6
The End-User License Agreement interface is displayed.
Select the I have read and agree to all terms check box. Step 7
Click Next. Step 8
The Startup Wizard interface is displayed. For details about quick settings during
startup, see "5.1.3.3 Resetting Password
5.1.3 Resetting Password
You can reset the password by the following methods when you forget the password for admin
account.
If the password reset function is enabled, you can use mobile phone to scan the QR code
to reset the password. For details, see "5.1.3.2 Resetting Password on Local Interface."
If the password reset function is disabled, there are two situations:
If you configured security questions, you can find back the password by the security
questions.
If you did not configure the security questions, you can only use the reset button on
the mainboard to restore the Device to factory default. For details, see "5.1.3.3 Using
Reset Button on the Mainboard."
Not all models are provided with reset button.
5.1.3.1 Enabling Password Reset Function
Select Main Menu > SYSTEM > SECURITY > System Service. Step 1
The System Service interface is displayed. See Figure 5-4.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua Technology XVR4 Series and is the answer not in the manual?

Dahua Technology XVR4 Series Specifications

General IconGeneral
BrandDahua Technology
ModelXVR4 Series
CategoryDVR
LanguageEnglish

Related product manuals