Local Configurations 212
5.14.2 Configuring POS Settings
Select Main Menu > POS > POS SETUP. Step 1
The POS SETUP interface is displayed. See Figure 5-184.
Figure 5-184
Configure the settings for the POS parameters. See Table 5-55. Step 2
In the POS Name list, select the POS machine that you want to
configures settings for. Click to modify the POS name.
The POS name supports 21 Chinese characters or 63 English
characters.
Select the channel(s) that you want to record. The selected
channel(s) starts recording after an alarm occurs.
The recording for POS alarms and auto recording function must
be enabled. For details, see "5.1.4.9 Configuring Recorded Video
Storage Schedule" and "5.9.1 Enabling Record Control."
Enter the privacy content.
Select POS by default. Different machine corresponds to different
protocol.
To Next Page
Loading...
Need help?
General
