Local Configurations 74
You can customize four color modes.
1. Click Customized. The Customized Color interface is
displayed.
2. In the Color Mode list, select Customized 1, for example.
Then configure the settings for sharpness, hue, brightness,
contrast and saturation. If you select All, the configuration will
applies to all four customized color modes.
3. Click OK.
4. On the COLOR interface, in the Color Mode list, you can
select the customized color mode.
Table 5-15
5.2.6 Live View Display
5.2.6.1 Configuring Display Settings
You can configure the display effect such as displaying time title and channel title, adjusting
image transparency, and selecting the resolution.
Select Main Menu > DISPLAY > Display. Step 1
The DISPLAY interface is displayed. See Figure 5-39.
Figure 5-39
Configure the settings for the display parameters. See Table 5-16. Step 2
To Next Page
Loading...
Need help?
General
