Dahua Technology XVR4 Series - Configuring Remote Devices; Adding Remote Devices

Local Configurations 104
5.6 Configuring Remote Devices
5.6.1 Adding Remote Devices
This function is available after you have configured the channel type as IP channel as
described in previous section, see "5.5.6 Configuring Channel Type."
You can add remote devices by adding the IP address.
Select Main Menu > CAMERA > REGISTRATION > Registration, the Registration interface
is displayed. See Figure 5-70.
Figure 5-70
Parameter
Description
Uninitialized
Enable the Uninitialized function, the uninitialized devices out of the
searched devices are displayed in the searched device list.
Initialize
Select the uninitialized device from the uninitialized device list, and
the click Initialize to start initializing device.
Show Filter
In the Show Filter list, select the remote device type that you want to
display in the searched device list.
None: Display all types of devices.

IPC: Display the front-end devices.

DVR: Display all storage devices such as NVR, DVR and HCVR.

OTHER: Display the devices that do not belong to IPC or DVR

type.