170
The account you login the remote device. Please
input here to password verification to change the
remote device password.
When you want to change several IP addresses,
once you input the IP address of the first device, the
IP address of the next device will increase
accordingly. For example, when the incremental
value is 1, if the IP address of the first device is
172.10.3.128, the IP address of the second device
will auto be set as 172.10.3.129.
Note
For the static IP address, system will alert you if there is any IP conflict. If you are changing several IP
addresses at the same time, system auto skip the conflicted IP and auto allocate again according to the
incremental value you set.
Figure 5-27
Export IP
System supports to export the registered device list and save it in the USB device.
Step 1 Inset the USB device and click Export.
The File Backup Encryption interface is displayed. See Figure 5-28.
To Next Page
Loading...
Need help?
General