Dahua NVR1A-4P Series - Page 192

180
HTTPS
Select the Enable check box and configure the port according to
your actual needs. The default value is 443. After HTTPS is
enabled, HTTP will be switched to HTTPS by force to transmit
data in a safer way.
RTSP port
The default value is 554.
5.10.2.3 HTTPS
In this interface, you can set to make sure the PC can successfully login via the HTTPS. It is to guarantee
communication data security. The reliable and stable technology can secure the user information security
and device safety. See Figure 5-38.
Note
 You need to implement server certificate again if you have changed device IP.
 You need to download root certificate if it is your first time to use HTTPS on current PC.
Figure 5-38
5.10.2.3.1 Create Server Certificate
If it is your first time to use this function, please follow the steps listed below.
In Figure 5-38, click button, input country name, state name and etc. Click
Create button. See Figure 5-39.
Note
Please make sure the IP or domain information is the same as your device IP or domain name.
Figure 5-39
You can see the corresponding prompt. See Figure 5-40. Now the server certificate is successfully
created.