204
inactive for a specified time. Value ranges from 0 to 60 minutes. 0
means there is no standby time. After the auto logout, the user
needs to input user name and password to login again.
5.10.5.2.2 Tour
The tour interface is shown as in Figure 5-80. Here you can set tour interval, split mode, motion detect
tour and alarm tour mode.
Figure 5-80
Please refer to the following sheet for detailed information.
Check the box here to enable tour function.
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
5.10.5.3 Voice
The audio function is to manage audio files and set schedule play function. It is to realize audio broadcast
activation function.
5.10.5.3.1 File List
From main menu->Setup->System->Voice->File list, here you can add audio file, or delete audio file. See
Figure 5-81.
To Next Page
Loading...
