User's Manual
127
If you have added a holiday, you can set the record period for the holiday.
Figure 4-36
● Define the period by drawing.
1. Select a corresponding date to set.
◇
Define for the whole week: Click next to
All
, all the icon switches to ,
you can define the period for all the days simultaneously.
◇
Define for several days of a week: Click before each day one by one,
the icon switches to . You can define the period for the selected days
simultaneously.
2. On the timeline, left click mouse and then drag to define a period.
There are six periods in one day, the Device starts recoding the selected event
type in the defined period. In Figure 4-38, the different color bars stand for
different record types.
◇
Green stands for general record.
◇
Yellow stands for MD (motion detection) record.
◇
Red stands for alarm record.
◇
Blue stands form intelligent record.
◇
Orange stands for MD&Alarm record.
◇
Purple stands for POS record.
◇
Once the time period overlaps, the record priority:
M&A
>
Alarm
>
POS
>
Intelligent
>
Motion
>
General.
◇
Select a record type and then click the of the corresponding date to
clear the corresponding period.
To Next Page
Loading...
Need help?
General
