Dahua NVR41 series User Manual

User's Manual
185
4.4.4 Calling PTZ Functions
After you have configured the PTZ settings, you can call the PTZ functions for monitoring from
the Expanded PTZ Control Panel. See Figure 4-95.
Figure 4-95
4.4.4.1 Calling Presets
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the preset that
you want to call.
Step 2 Click to call the preset.
Step 3 Click again to stop calling the preset.
4.4.4.2 Calling Tours
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the tour that
you want to call.
Step 2 Click to call the tour.
Step 3 Click again to stop calling the tour.
4.4.4.3 Calling Patterns
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the pattern
that you want to call.
Step 2 Call to call the pattern.
Step 3 The PTZ camera moves according to the configured pattern repeatedly.
Step 4 Click again to stop calling the pattern.
4.4.4.4 Calling AutoScan
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the border that
you want to call.
Step 2 Click .
Step 3 The PTZ camera performs scanning according to the configured borders.
Step 4 Click again to stop auto scanning.
4.4.4.5 Calling AutoPan
Step 1 On the expanded PTZ control panel, click to start moving in horizontal direction.
Step 2 Click again to stop moving.

Dahua NVR41 series Specifications

General

Brand	Dahua
Model	NVR41 series
Category	Network Hardware
Language	English