User's Manual
271
● Select one region, for example, click .
● Drag on the screen to select the region that you want to detect.
● The selected area shows the color that represents the region.
● Configure the parameters. See Table 4-57.
Table 4-57
Enter a name for the region.
Every region of every channel has an individual sensitivity value.
The bigger the value is, the easier the alarms can be activated.
Adjust the threshold for motion detect. Every region of every channel
has an individual threshold.
When anyone of the four regions activates motion detect alarm, the channel where
this region belongs to will activate motion detect alarm.
Step 4 Right-click on the screen to exit the region setting interface.
Step 5 On the
Motion Detection
interface, click
Apply
to complete the settings.
4.8.5.1.2 Setting Schedule
The system only activates the alarm in the defined period.
Step 1 Next to
Schedule
, click
Setting
.
The Setting interface is displayed. See Figure 4-175.
Figure 4-175
Step 2 Define the motion detection period. By default, it is active all the time.
● Define the period by drawing.
◇
Define for a specified day of a week: On the timeline, click the half-hour blocks
to select the active period.
◇
Define for several days of a week: Click before each day, the icon switches