User's Manual
142
4.2.4 Image
You can set network camera parameters according to different environments. It is to get the
best video effect.
Step 1 Select
Main Menu
>
Camera
>
Image
.
The
Image
interface is displayed. See Figure 4-54.
Figure 4-54
Step 2 Configure parameters. See Table 4-13.
Different series network camera displays different parameters. The actual product
shall prevail.
Table 4-13
In the Channel list, select the channel that you want to configure.
There are three config files for you. System has configured the
corresponding parameters for each file, you can select according
to your actual situation.
Adjusts the image brightness. The bigger the value is, the brighter
the image will become. Adjusts the brightness according to actual
environment.
To Next Page
Loading...
