Enter IP address of router on the WAN.
After mapping succeeded, the system obtains IP address automatically
without performing any configurations.
The settings in port mapping list correspond to the UPnP port mapping list
on the router.
● Service Name: Name of network server.
● Protocol: Type of protocol.
● Internal Port: Internal port that is mapped on the Device.
● External Port: External port that is mapped on the router.
● To avoid the conflict, when setting the external port, try to use the
ports from 1024 through 5000 and avoid popular ports from 1 through
255 and system ports from 256 through 1023.
● When there are several devices in the LAN, properly arrange the ports
mapping to avoid mapping to the same external port.
● When establishing a mapping relationship, ensure the mapping ports
are not occupied or limited.
● The internal and external ports of TCP and UDP must be the same
and cannot be modified.
● Click to modify the external port.
.
To Next Page
Loading...
Need help?
General
