Dahua NVR41 series User Manual

User's Manual
326
Parameter
Description
Host IP
The IP address and communication port of the PC installed with
alarm client.
Port
Auto Report Plan
In the
Auto Report Plan
list, select time cycle and specific time for
uploading alarm.
Step 3 Click
Apply
to complete the settings.
4.12.14 Register
You can register the Device into the specified proxy server which acts as the transit to make it
easier for the client software to access the Device.
Step 1 Select
Main Menu
>
NETWORK
>
Register
.
The
Register
interface is displayed. See Figure 4-224.
Figure 4-224
Step 2 Configure the settings for the register parameters. See Table 4-76.
Table 4-76
Function
Description
Enable
Enable the register function.
Server IP Address
Enter the server IP address or the server domain that you want
to register to.
Port
Enter the port of the server.
Sub Service ID
This ID is allocated by the server and used for the Device.
Step 3 Click
Apply
to complete the settings.

Dahua NVR41 series Specifications

General

Brand	Dahua
Model	NVR41 series
Category	Network Hardware
Language	English