User's Manual
141
Figure 4-52
Step 10 Click
Finished
to complete the setup.
4.2.3 Shortcut Menu to Add Camera
If you have not registered a remote device to a channel, go to the live view interface to add.
Step 1 On the live view interface, Move your mouse to window.
There is an icon + on the channel window. See Figure 4-53.
Figure 4-53
Step 2 Click "+", device pops up interface to add network camera. Refer to "4.1.4.4 Adding
Camera" for detailed information.
To Next Page
Loading...
