User's Manual
143
Adjusts the image contrast. The bigger the value is, the more
obvious the contrast between the light area and dark area will
become. Adjusts the contrast according to actual environment.
Adjusts the color shades. The bigger the value, the lighter the
color will become. Adjusts the saturation according to actual
environment.
Adjusts the sharpness of image edge. The bigger the value is, the
more obvious the image edge is. Adjusts the sharpness according
to actual environment.
It is to adjust image brightness and enhance the image dynamic
display range. The bigger the value is, the more bright the video
is.
Enable the function, the left and right side of the video image will
be switched. It is disabled by default.
This function is for some series products only.
It is to set monitor video display direction. It includes Normal,
180°, 90°, 270°.
● It is for the camera of auto iris only.
● After enable auto iris function, the iris can
automatically zoom in/zoom out according
to the brightness of the environment and the
image brightness changes too.
● If disable the auto iris function, the iris does
not automatically zoom in/zoom out
according to the brightness of the
environment when the iris is at the biggest
value.
This function specially applies to the image
which frame rate is configured as 2 at least. It
reduces the noises by making use of the
information between two frames. The bigger the
value is, the better the effect.
To Next Page
Loading...
Need help?
General
