User's Manual
306
The target type includes luggage, bag, box, and non-motor vehicle.
Step 3 Draw the detection rule.
1. Click to draw a rectangle on the surveillance video image. Right-click the image to
stop drawing.
2. Click to draw the minimum size or maximum size to filter the target.
The system triggers an alarm only when the size of detected target is between the
maximum size and the minimum size.
Click to delete the drawn size.
3. Configure the rule name and duration.
4. Click
OK
.
Step 4 Configure alarm schedule and linkage.
1. Click .
2. Click
Setting
next to
Schedule
to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
Figure 5-196 Schedule and alarm linkage
3. Configure alarm linkage. For details, see Table 5-50.
4. Click
Apply
.
Step 5 Click
Apply
.
To Next Page
Loading...
Need help?
General
