Dahua VTO2000A-C User Manual

30
Figure 5-18
Figure 5-19
Set according to actual network access mode. Step 4
 Wired IP
Enter “Local IP”, “Subnet Mask” and “Gateway”, press [OK]. Or press to enable
DHCP function and obtain IP info automatically.
If the device has wireless function, please click “Wired IP” tab to set it.
 WLAN
Press to enable WIFI function. 1.
The system displays available WIFI list, as shown in Figure 5-20.

Dahua VTO2000A-C Specifications

General

Brand	Dahua
Model	VTO2000A-C
Category	Measuring Instruments
Language	English