Daikin Altherma 3 GEO Series - To Remove the Accessories from the Indoor Unit; To Handle the Indoor Unit

3 | About the box
Installer reference guide
17
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
3.2.2 To remove the accessories from the indoor unit
1×
a
1×
d
1×
c
1×
i
1×
j
1×
k
1×
l
1×
e
1×
g
1×
b
4×
f
ENERG
IJAY
IAIE
ENERG
IJAY
IAIE
1×
h
a Shut-off valve with integrated filter
b Safety valve (connection parts for mounting on top of brine level vessel included)
c Brine level vessel
d Remote outdoor sensor (with installation manual)
e Cable for remote outdoor sensor (40m)
f O-rings (spares for hydro module shut-off valves)
g Tundish (to mount onto the pressure relief valve discharge pipe)
h Energy label
i General safety precautions
j Addendum book for optional equipment
k Installation manual
l Operation manual
3.2.3 To handle the indoor unit
Mind the following guidelines when handling the unit:
>200
kg
▪ The unit is heavy. At least 2 persons are needed to handle it.
▪ Use a trolley to transport the unit. Make sure to use a trolley with a sufficiently
long horizontal ledge, suitable for transportation of heavy appliances.
▪ When transporting the unit, keep the unit upright.
▪ Use the handles at the back to carry the unit.
▪ Remove the hydro module when you want to carry the unit up or down
staircases. See "6.2.3 To remove the hydro module from the unit" [4 57] for
more information.
▪ It is recommended to use lifting straps to carry the unit up or down staircases.