Daikin Altherma 3 GEO Series - 4 About the Units and Options; Overview: about the Units and Options; Identification; Identification Label: Indoor Unit

4 | About the units and options
Installer reference guide
19
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
4 About the units and options
4.1 Overview: About the units and options
This chapter contains information about:
▪ Identifying the indoor unit
▪ Combining the indoor unit with options
4.2 Identification
NOTICE
When installing or servicing several units at the same time, make sure NOT to switch
the service panels between different models.
4.2.1 Identification label: Indoor unit
Location
Model identification
Example: EGSAX10UDA9W
Code Description
E European model
GS Ground source heat pump
A Refrigerant R32
X H=Heating only
X=Heating/cooling
10 Capacity class
U UK model
DA Model series
9W Backup heater model
INFORMATION
Active cooling is available for reversible units only. Passive cooling is only available for
heating only models. In this document, active cooling is referred to as “cooling”.