Daikin Altherma 3 GEO Series - To Remove the Hydro Module from the Unit

6 | Unit installation
Installer reference guide
57
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
6 In case you have to install additional options that require access to the main
switch box, remove the main switch box cover as follows:
4×
6.2.3 To remove the hydro module from the unit
Removing the hydro module is only required for easier transportation of the unit or
for servicing. The removal of the module will significantly reduce the weight of the
unit. This makes the unit easier to handle and carry.
1 Open the following (see "6.2.2To open the indoor unit"[455]):
1 User interface panel
2
1
2 Front panel
2 Remove the insulation from the shut-off valves by cutting the cable ties.
3 Remove the clips that lock the valves in place.