Daikin Altherma 3 GEO Series - Page 58

6 | Unit installation
Installer reference guide
58
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
4 Uncouple the piping.
4×
5 Remove the lower hydro module cover.
4×
T25
6 Unlink the connectors that run from the hydro module to the main switch box
or other locations. Route the wires through the grommets of the upper hydro
module cover.
X22Y
X11YB
X803YA
X1YA
7 Remove the upper hydro module cover. You can lift up the uncoupled piping
to access the screws more easily, and to take off the cover itself.
5×
T25
8 Remove the screw that fixes the hydro module to the bottom plate.