Daikin Altherma 3 GEO Series - Menu Structure: Overview Installer Settings

10 | Configuration
Installer reference guide
198
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
10.7 Menu structure: Overview installer settings
[9]
Installer settings
Configuration wizard
Domestic hot water
Backup heater
Emergency
Balancing
Water pipe freeze prevention
Benefit kWh power supply
Power consumption control
Energy metering
Sensors
Bivalent
Alarm output
Auto restart
Power saving function
Disable protections
Overview field settings
Forced defrost
Brine freezing temperature
[9.2] Domestic hot water
Domestic hot water
DHW pump
DHW pump schedule
Solar
[9.3] Backup heater
Backup heater type
Voltage
Configuration
Maximum capacity
Equilibrium
Equilibrium temperature
Operation
[9.6] Balancing
Space heating priority
Priority temperature
Minimum running timer
Anti-recycle timer
Maximum running timer
Additional timer
[9.8] Benefit kWh power supply
Benefit kWh power supply
Allow heater
Allow pump
[9.9] Power consumption control
Power consumption control
Type
Limit
Limit 1
Limit 2
Limit 3
Limit 4
Priority heater
Current sensor offset
BBR16 activation
BBR16 power limit
(*)
[9.A] Energy metering
Electricity meter 2
Electricity meter 1
[9.B] Sensors
External sensor
Ext. amb. sensor offset
Averaging time
[9.C] Bivalent
Bivalent
Boiler efficiency
Temperature
Hysteresis
(*)
INFORMATION
Depending on the selected installer settings and unit type, settings will be visible/
invisible.