SiBE041102_A Operation Manual
Operation Manual 43
2.5 POWERFUL Operation
NOTE
POWERFUL Operation
POWERFUL operation quickly maximises the cooling (heating) effect
in any operation mode. You can get the maximum capacity.
To start POWERFUL operation
1. Press .
• POWERFUL operation ends in 20 minutes. Then the
system automatically operates again with the previous
settings which were used before POWERFUL operation.
• “ ” is displayed on the LCD.
2. Press again.
• “ ” is displayed on the LCD.
Notes on POWERFUL operation
• When using POWERFUL operation, there are some functions which are not available.
• POWERFUL operation cannot be used together with ECONO or COMFORT AIRFLOW
operation.
Priority is given to the function of whichever button is pressed last.
• POWERFUL operation can only be set when the unit is running.
• POWERFUL operation will not increase the capacity of the air conditioner if the air
conditioner is already in operation with its maximum capacity demonstrated.
• In COOL, HEAT and Auto operation
To maximise the cooling (heating) effect, the capacity of outdoor unit is increased and the
airflow rate is fixed to the maximum setting.
The temperature and airflow settings are not variable.
• In DRY operation
The temperature setting is lowered by 2.5˚C and the airflow rate is slightly increased.
• In FAN operation
The airflow rate is fixed to the maximum setting.
14
To cancel POWERFUL operation
To Next Page
Loading...
Need help?
General
