Operation Manual SiBE041102_A
42 Operation Manual
2.4 COMFORT AIRFLOW Operation
NOTE
COMFORT AIRFLOW Operation
The flow of air will be in the upward direction while in COOL
operation and in the downward direction while in HEAT operation,
which will provide a comfortable wind that will not come in direct
contact with people.
To start COMFORT AIRFLOW
operation
To cancel COMFORT AIRFLOW
operation
1. Press .
• The flap position will change, preventing air from
blowing directly on the occupants of the room.
• “ ” is displayed on the LCD.
• Airflow rate is set to Auto.
COOL/DRY: The flap will go up.
HEAT: The flap will go down.
2. Press again.
• The flap will return to the memory position from before
COMFORT AIRFLOW mode.
• “ ” disappears from the LCD.
COOL operation HEAT operation
Notes on COMFORT AIRFLOW operation
• The flap position will change, preventing air from blowing directly on the occupants of the
room.
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same
time.
Priority is given to the function of whichever button is pressed last.
• The airflow rate will be set to Auto. If the upper and lower airflow direction is selected, the
COMFORT AIRFLOW operation will be canceled.
13
To Next Page
Loading...
Need help?
General
