Operation Manual SiBE041102_A
40 Operation Manual
2.3 Adjusting the Airflow Direction
Adjusting the Airflow Direction
You can adjust the airflow direction to increase your comfort.
To start auto swing
To set the flap at desired position
• This function is effective while flap is in auto swing mode.
Press when the flap has reached the
desired position.
• The flap will stop moving.
• “ ” disappears from the LCD.
Upper and lower airflow direction
Press .
• “ ” is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
11
To Next Page
Loading...
Need help?
General
