D&R AXUM - Page 104

A·X·U·M User Manual Version 2.5 - 2011-01-28
AXUM from D&R - Phone: +31 294 418014 - E-Mail: info@d-r.nl - 104 -
Function name
comments
Example object to connect to
Version
EQ Band 2
Bandwidth reset
Sets the EQ bandwidth to the band default
Encoder Switch
2.0
EQ Band 2 Type
Steps through the EQ band types available
Encoder
2.0
EQ Band 3 Level
Controls the EQ level in steps of 0.1 dB
Encoder
2.0
EQ Band 3
Frequency
Controls the EQ frequency
Encoder
2.0
EQ Band 3
Bandwidth
Controls the EQ bandwidth
Encoder
2.0
EQ Band 3 Level
reset
Sets the EQ level to the band default
Encoder Switch
2.0
EQ Band 3
Frequency reset
Sets the EQ frequency to the band default
Encoder Switch
2.0
EQ Band 3
Bandwidth reset
Sets the EQ bandwidth to the band default
Encoder Switch
2.0
EQ Band 3 Type Steps through the EQ band types available Encoder 2.0
EQ Band 4 Level
Controls the EQ level in steps of 0.1 dB
Encoder
2.0
EQ Band 4
Frequency
Controls the EQ frequency
Encoder
2.0
EQ Band 4
Bandwidth
Controls the EQ bandwidth
Encoder
2.0
EQ Band 4 Level
reset
Sets the EQ level to the band default
Encoder Switch
2.0
EQ Band 4
Frequency reset
Sets the EQ frequency to the band default
Encoder Switch
2.0
EQ Band 4
Bandwidth reset
Sets the EQ bandwidth to the band default Encoder Switch 2.0
EQ Band 4 Type Steps through the EQ band types available Encoder 2.0
EQ Band 5 Level
Controls the EQ level in steps of 0.1 dB
Encoder
2.0
EQ Band 5
Frequency
Controls the EQ frequency
Encoder
2.0
EQ Band 5
Bandwidth
Controls the EQ bandwidth
Encoder
2.0
EQ Band 5 Level
reset
Sets the EQ level to the band default
Encoder Switch
2.0
EQ Band 5
Frequency reset
Sets the EQ frequency to the band default Encoder Switch 2.0
EQ Band 5
Bandwidth reset
Sets the EQ bandwidth to the band default Encoder Switch 2.0
EQ Band 5 Type
Steps through the EQ band types available
Encoder
2.0
EQ Band 6 Level
Controls the EQ level in steps of 0.1 dB
Encoder
2.0
EQ Band 6
Frequency
Controls the EQ frequency
Encoder
2.0
EQ Band 6
Bandwidth
Controls the EQ bandwidth
Encoder
2.0
EQ Band 6 Level
reset
Sets the EQ level to the band default Encoder Switch 2.0
EQ Band 6
Frequency reset
Sets the EQ frequency to the band default Encoder Switch 2.0
EQ Band 6
Bandwidth reset
Sets the EQ bandwidth to the band default
Encoder Switch
2.0
EQ Band 6 Type
Steps through the EQ band types available
Encoder
2.0
EQ On/Off
Select the EQ on/off (all bands!)
Switch
2.0
Downward expander
threshold
Selects the threshold for the downwards expander in
the range from -50 to 0 dB
Encoder, Display 2.1
AGC threshold Selects the threshold for the AGC (automatic gain
control) in the range from -30-0 dB
Encoder, Display 2.1
AGC ratio Steps through the ratio of AGC (1:1 – 1:25) Encoder, Display 2.1
Dynamics On/Off
Select the dynamics on/off (dynamics is
AGC+Expander)
Switch
2.0
Mono
Makes the module output mono
Switch
2.0
Mono On/Off
Select the Mono on/off
Switch
2.0
Pan Steps the panning from left to right Encoder, Display 2.0
Pan reset
Sets the panning to the center
Encoder switch
2.0
Module level
This function handles the fader functionality
Fader
2.0
Module on This function handles like a on-switch (press = on) Switch 2.0
Module off
This function handles like a off-switch (press = off)
Switch
2.0
Module on/off
This function handles like a on/off-switch (press =
toggle between on and off)
Switch
2.0
Fader and on active
This function shows a ‘1’ if the fader and on are
active. When received a ‘1’ the fader and on are
activated
Switch, GPIO
2.1