DANE-ELEC myDitto - Page 56

56
Dane-Elec. All rights reserved 2010
my-Ditto User Manual
Parameters
Description
Partition
The partition name of the attached storage device.
Size
Total space in this partition.
Used
Total used space in this partition.
Free
The remaining free space in this partition.
Status
The format type of the partition: FAT16, FAT32, NTFS or Linux.
Refresh
Refreshes the Storage Status page.
Unplug
Un mounts the external USB storage device. When the LED of the
USB2 turns off, you can safely remove the USB storage device.
Firmware
Allow the upgrade of my-Ditto's firmware.
Firmware upgrades will automatically reboot the system after the upgrade process has
taken place.
1. Click <Next> to proceed with the firmware upgrade process.
2. Browse to the location where the new firmware file is located and click <Apply>.