Danfoss FC 300

FC 300 Operating Instructions
How to Programme
" 13-** Smart Logic
Par.
No.
#
Parameter description Default value
(SR = Size Related)
4-set-up FC 302
only
Change
during
operation
Conver-
sion
index
Type
13-0* SLC Settings
13-00SL Controller Mode - 2 set-ups TRUE - Uint8
13-01Start Event - 2 set-ups TRUE - Uint8
13-02Stop Event - 2 set-ups TRUE - Uint8
13-03Reset SLC [0] Do not reset SLC All set-ups TRU E - Uint8
13-1* Comparators
13-10Comparator Operand - 2 set-ups TRUE - Uint8
13-11Comparator Operator - 2 set-ups TRUE - Uint8
13-12Comparator Value SR 2 set-ups TRUE -3 Int32
13-2* Time rs
13-20SL Controller Timer SR 1 set-up TRUE -3 TimD
13-4* Logic Rules
13-40Logic Rule Boolean 1 - 2 set-ups TRUE - Uint8
13-41Logic Rule Operator 1 - 2 set-ups TRUE - Uint8
13-42Logic Rule Boolean 2 - 2 set-ups TRUE - Uint8
13-43Logic Rule Operator 2 - 2 set-ups TRUE - Uint8
13-44Logic Rule Boolean 3 - 2 set-ups TRUE - Uint8
13-5* States
13-51SL Controller Event - 2 set-ups TRUE - Uint8
13-52SL Controller Action - 2 set-ups TRUE - Uint8
*
defa
ult setting
()dis
play text
[]val
ue for use in communication via serial c ommunication port
55
MG.33.A7.02 - VLT is a registered Danfoss trademark