Danfoss VLT AutomationDrive FC 300 Series Design Guide

FC 300 Design Guide
Application Examples
" Encoder Connection
The purpose of this guideline is to ease the set-up of encoder connection to FC 302. Before setting up
the encoder, the basic settings for a closed-loop spe
ed control system will be shown.
Encoder Connection to FC 302
113
MG.33.B3.22 - VLT is a registered Danfoss trademark

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English