Danfoss VLT AutomationDrive FC 300 Series Design Guide

FC 300 Design Guide
Introduction to FC 300
130BA140.10
FC 300
Design Guide
Software version: 2.0x
This Design Guide can be used for all FC 300 adjustable
frequency drives (AFD) with software version 2.0x.
The software version number can be seen from parameter
15-43.
" CE Conformity and Labeling
What is CE Conformity and Labeling?
The purpose of CE labeling is to avoid technical trade obstacles within EFTA and the EU. The EU
has introduced the CE label as a simple way of showing whether a product complies with the
relevant EU directives. The CE label says nothing about the specifications or quality of the product.
Adjustable fre quency drives are regulate d by three EU directives:
The machinery directive (98/37/EEC)
All machines with critical moving p arts are covered by the m achinery directive of January 1, 1995. Since an
adjustable frequency drive is largely electrical, it does not fall under the m achinery directive. However, if
13
MG.33.B3.22 - VLT is a registered Danfoss trademark

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English