Danfoss VLT AutomationDrive FC 300 Series Design Guide

FC 300 Design Guide
How to Program
Process block: Made u p of a data block of four
bytes (2 words) and contains:
- Control word and reference value (from
master to slave)
- Status word and present output frequency
(from slave to master)
Text block is used to re ad or write texts
via the data block.
Parameter commands and responses (AK)
*
default setting ()display text []value for use in communication via serial c ommunication port
238
MG.33.B
3.22 - VLT is a registered Danfoss trademark

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English