Datakom DK-45 User Manual

DK-45 Kullanım Kılavuzu V1.0 (22.09.2016)
- 4 -
1. INSTALLATION INSTRUCTIONS
1.1. FRONT AND REAR PANELS
1.2. MECHANICAL INSTALLATION
1.3. ELECTRICAL INSTALLATION
1.4. CONNECTION DIAGRAM
2. PUSHBUTTON FUNCTIONS
3. SCREEN SCROLLING
4. MODES OF OPERATION
5. ALARMS AND WARNINGS
5.1. SERVICE ALARM OPTIONS
5.2. LIST OF FAULT CODES
6. OTHER FEATURES
6.1. RESETTING SERVICE COUNTERS
6.2. MODIFYING MOTOR RUN HOURS
6.3. SELECTION OF MOTOR HOURS COUNTING METHOD
6.4. CONNECTION TOPOLOGIES
6.5. PREVENTING PRESSURE LOSS
6.6. ALARM HISTORY
6.7. DRYER FUNCTION
6.8. VARIABLE UNLOAD TIMER
6.9. PID CONTROL AND ANALOG OUTPUT (PWM)
6.10. MOTOR PTC INPUT
7. MULTI-COMPRESSOR OPERATION
8. DIGITAL INPUTS
9. RELAY OUTPUTS
10. PROGRAMMING
10.1. ENTERING THE PROGRAMMING MODE
10.2. LIST OF PARAMETERS
11. MODBUS COMMUNICATIONS
11.1. DESCRIPTION
11.2. MODBUS REGISTER LIST
11.3. ALARMS, WARNINGS, SERVICE REQUESTS
12. DECLARATION OF CONFORMITY
13. TECHNICAL SPECIFICATIONS
TABLE OF CONTENTS

Datakom DK-45 Specifications

Power

supply voltage	305 – 460 VAC
supply frequency	50 - 60Hz
power consumption	< 4 VA

Measurement Inputs

voltage input range phase-phase	20 - 520 V AC
voltage input range phase-neutral	10 - 300 V AC
frequency input range	30 - 100 Hz

Relay Outputs

relay output current	5A
relay output voltage	250V AC
burden	< 0.1VA per phase

Operating Environment

operating temperature	-20°C to +70 °C
storage temperature	-40°C to +80 °C
max. relative humidity	%95 non condensing

Physical Characteristics

dimensions	133x107x46mm
panel cutout	117x87mm minimum
weight	350 gr