UPC-E ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
101
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E bar codes.
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E bar code data.
$CEBEN00
UPC-E = Disable
UPC-E = Enable
$CEBEN01
$CEBCT00
UPC-E Check Character Transmission = Don’t Send
UPC-E Check Character Transmission = Send
$CEBCT01
To Next Page
Loading...
