PARTS OF THE READER
PRODUCT REFERENCE GUIDE
17
PARTS OF THE READER
MULTIFUNCTIONAL BUTTON
The multifunctional button on the HS7600 Scanner can be used to read bar codes, as
well as to retrieve information, such as battery status, and perform different actions.
The table below explains the different actions that can be performed by pressing the
multifunction button.
To configure and disable each function, see Aladdin.
1. Scan Window 3. Recharge, trigger and USB contact area
2. Multifunctional key button 4. LEDs
4
1
2
3
MULTIFUNCTIONAL BUTTON OUTCOME
Press once and hold <5 second Device reads the label
Double Press (only on iOS)
Enable and disable virtual keyboard on the
screen of the connected host.
Triple Press
If the device is connected to a host via Blue-
tooth, the rear LED turns blue for 2 seconds
Press and hold 5-9 seconds
Check battery status:
Green Side LED (charge > 50%)
Orange Side LED (charge < 50%)
Hold >10 seconds Unlink from any connected host
Press >5 seconds the hand trigger with the
device inserted + multifunctional button
HW reset
To Next Page
Loading...
