Datalogic CODiScan HS7600 - Interleaved 2 of 5 (I 2 of 5); I 2 of 5 Enable;Disable

ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES
132 CODISCAN™ HS7600
INTERLEAVED 2 OF 5 (I 2 OF 5)
The following options apply to the I 2 of 5 symbology.
I 2 of 5 Enable/Disable
When disabled, the reader will not read I 2 of 5 bar codes.
CAUTION: When reading this symbology, the settings for I 2 of 5 Length
Control AND I 2 of 5 Check Character Calculation MUST be enabled to
increase decoding safety.
$CI2EN00

I 2 of 5 = Disable
I 2 of 5 = Enable
$CI2EN01