MOUNTING THE READER
PRODUCT REFERENCE GUIDE
11
Maintenance and Disposal
The electronic parts are detachable from the fabric to allow:
• washing/changing the fabric
• changing the trigger
• disposing of the different parts
To remove the holder and the trigger from the fabric, lift the piece of fabric covering the
cable as shown below and detach the parts.
To re-assemble the hand trigger, first place the trigger, then the cable under the piece of
fabric and lastly the holder.
WARNING: Remove the trigger and the electronic parts before washing the
fabric.
NOTE: Wash the fabric at 30 °C. Air dry.
To Next Page
Loading...
