Datalogic CODiScan HS7600 - Beep Volume; Disconnect Beep

WIRELESS BEEPER FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 219
Beep Volume
Selects the beeper volume (loudness) of radio-specific beep indications. There are three
selectable volume levels.
Disconnect Beep
Enables/disables the beep indication that a handheld has become disconnected from a
host.
$CBTBV00
Beep Volume = Low
Beep Volume = Medium
$CBTBV01
$CBTBV02

Beep Volume = High
$CBTDB00
Disconnect Beep = Disable

Disconnect Beep = Enable
$CBTDB01