ENTER/EXIT PROGRAMMING MODE WIRELESS FEATURES
220
CODISCAN™ HS7600
Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps (three per
second) when the handheld goes out of range. This is especially useful in instances
where the reader might inadvertently have been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the host. If the reader is
asleep or disconnected from the host, there is no way for it to know where it is relative
to the host because communication is not active between the devices.
$CBTLB00
Leash Alarm = Disable
Leash Alarm = 1 Second
$CBTLB01
$CBTLB02
Leash Alarm = 2 Seconds
Leash Alarm = 3 Seconds
$CBTLB03
To Next Page
Loading...
