Name: Datalogic Kyman
Brand: Datalogic
Rating: 5 (1 reviews)

To Next Page

To Previous Page

KYMAN™

Firmware Update Procedure

1. Download the update from the web site (see previous par.). It is a zip file

containing the files:

• DLUpdater.exe – that starts the update;

• DLUpdate.bin – binary file containing the updated firmware;

2. Copy the files DLUpdater.exe (optional) and DLUpdate.bin on a Mini SD card.

3. Insert the Mini SD card in the terminal slot (see par.

1.5).

4. Open the folder

“\Storage Card” on the terminal and run DLUpdater.exe

(double tap the icon). As an alternative, you can also perform a reboot of the

terminal (warm or cold).

5. The message shown in figure 1 will come up on the screen. It informs that

DLUpdater found a firmware update in “

\Storage Card\DLUpdate.bin”. It also

warns the user that by proceeding with the terminal firmware upgrade all data

and configurations (registry) may be lost. Select

<YES> to continue, <NO> to

cancel operations.

6. DLUpdater detects whether an external power source is present. If not, a

warning will come up on the screen asking for a confirmation before carrying on

(see figure 2).

Figure 1 Figure 2

7. DLUpdater performs all the necessary operations of check, update and verify

and, if no errors occur during the update, terminates the running invoking a cold

boot of the terminal, so that the update process could be completed.

Questions and Answers:

Need help?

Do you have a question about the Datalogic Kyman and is the answer not in the manual?

Datalogic Kyman Specifications

General