USE AND FUNCTIONING
3
8. Following the operating system upgrade, the message shown in figure 3 may
come up at the terminal startup. It informs the user that a flash disk formatting
(folder
\backup) would required for a clean update and asks whether to proceed
with this operation. Select
<YES> to format the flash disk. Select <NO> to
preserve the current data stored in the backup folder. Sometimes the update
process may force a flash format. In these cases the data stored in the backup
folder will be irreparably lost. It is therefore recommended to run a backup of the
data you want to preserve before starting a firmware update.
Figure 3
77
To Next Page
Loading...
