Datalogic PowerScan M8300 User Manual

REFERENCES
185
5.10 DISPLAY PARAMETERS (SOME M8300 MODELS ONLY)
5.10.1 Display Mode
The user can control the reader display behavior according to the following
selections:
Normal mode: When a barcode is read with the reader:
• The code is sent to the Host.
• The reader display is
not cleared
• There is no Local Echo to the reader display.
. Therefore if any previous data was displayed
on the reader screen it remains.
Clear Display After Decode mode: When a barcode is read with the reader:
• The code is sent to the Host.
• The reader display
is cleared
• There is no Local Echo of the code to the reader display.
. Therefore if any previous data was displayed on
the reader screen it is cancelled and the screen remains blank.
Local Echo mode: When a barcode is read with the reader:
• The code is sent to the Host.
• The reader display
is cleared
• The code is also sent to the reader display (Local Echo).
.
• The cursor is positioned after the last printed character on the reader display.
Host messages sent to the reader
are always written to the reader display.

Datalogic PowerScan M8300 Specifications

General

Scanner type	1D
Maximum range	30 m
Read rate (max)	40 reads/s
Yaw reading angle	-60 - 60 °
Decoding standards	GS1 DataBar, Code 16K, Code 49, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional
Tilt reading angle	-20 - 20 °
Pitch reading angle	-55 - 55 °
Operating time	240 min
Dimensions (WxDxH)	114 x 69 x 210 mm
Bluetooth	No
Operating frequency	910 MHz
Input voltage	10 - 30 V
Battery capacity	2150 mAh
Power requirements	0.33 - 1A
Number of reads per charge	60000
Certification	IP64, China RoHS, EU RoHS, CDRH Class II, IEC 60825-1 Class 2
Keys quantity	3 keys
Product color	Black, Yellow
LED indicators	Charging, Power
Display resolution	32 x 96 pixels
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Weight	393 g