EasyManuals Logo

Datalogic PowerScan M8300 User Manual

Datalogic PowerScan M8300
245 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #216 background imageLoading...
Page #216 background image
TECHNICAL FEATURES
207
7.4 BC-80X0 / C-8000
BC-80X0
C-8000
Electrical and General Features
Supply Voltage
External Power 10 to 30 VDC
Host Power 5 VDC ±10%
Power Consumption
External Power max. 10 W (charging)*
Host Power max. 500 mA (charging)
Indicators
Ext. Power /Data yellow LED
Host Power/Data yellow LED
Reader batt. state green/red LED
Aux. batt. state green/red LED (BC-8000/C-8000 only)
beeper
Recharge Time
External Power max. 4 hours with 2150 mAh Li-Ion battery
Host Power max. 10 hours with 2150 mAh Li-Ion battery
Host Interfaces
RS-232 300 to 38400 baud 9600 baud
WEDGE
IBM AT or PS/2, XT, PC Notebook, IBM
SURE1, IBM 3153, 31xx, 32xx, 34xx, 37xx
terminals, Wyse terminals, Digital VT
terminals, Apple ADB Bus supported
Not supported
PEN Emulation
Selectable minimum pulse from
200 µS to 1.2 mS
Not supported
USB
USB-KBD, USB-KBD-ALT-MODE, USB-
KBD APPLE, USB-COM, USB-IBM-Table
Top, USB-IBM-Hand Held
USB-COM
Environmental Features
Working Temperature -20° to +50 °C / -4° to +122 °F**
Storage Temperature -20° to +70 C / -4° to +158° F
Humidity 90% non condensing
Protection IP40
Mechanical Features
Weight without cable about 380 g / 13.4 oz
Dimensions (without antenna) 204 x 108 x 95 mm / 9.44 x 4.25 x 3.74 in
Material ABS
* Having a switching regulator inside, the BC-80X0 and C-8000 draw the same power,
regardless of the supply voltage. i.e. as the input voltage increases the current drawn
decreases.
** Batteries must be charged at a temperature ranging from 0° to +40 °C / +32° to +104 °F.

Table of Contents

Other manuals for Datalogic PowerScan M8300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic PowerScan M8300 and is the answer not in the manual?

Datalogic PowerScan M8300 Specifications

General IconGeneral
Scanner type1D
Maximum range30 m
Read rate (max)40 reads/s
Yaw reading angle-60 - 60 °
Decoding standardsGS1 DataBar, Code 16K, Code 49, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional
Tilt reading angle-20 - 20 °
Pitch reading angle-55 - 55 °
Operating time240 min
Dimensions (WxDxH)114 x 69 x 210 mm
BluetoothNo
Operating frequency910 MHz
Input voltage10 - 30 V
Battery capacity2150 mAh
Power requirements0.33 - 1A
Number of reads per charge60000
CertificationIP64, China RoHS, EU RoHS, CDRH Class II, IEC 60825-1 Class 2
Keys quantity3 keys
Product colorBlack, Yellow
LED indicatorsCharging, Power
Display resolution32 x 96 pixels
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)0 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight393 g

Related product manuals