EasyManuals Logo

Datalogic PowerScan M8300 User Manual

Datalogic PowerScan M8300
245 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #210 background imageLoading...
Page #210 background image
MESSAGE FORMATTING
201
6.4 MESSAGES FROM SCANNER COMMAND KEYS
6.4.1 PowerScan M8300 keypad
The PowerScan
®
M8300 series scanners with display have 3 command keys that can
each be associated with a character to send to the host.
By pressing the keys on the scanner, the associated character with its relative
message formatting is sent to the Host. For example, keys can be used to select
items from a menu sent to the scanner display by the application program.
The general format is:
[Header] [Scanner_Addr]
[Scanner_Addr_delimiter]
] [Cradle_Addr] [Cradle_Addr_delimiter]
[Time stamp] [Ts_delimiter] [Code ID] [Code Length]
KeyID
[Terminator]
[Items in square brackets are optional.]
The messages are handled by the system as if they were barcodes, that's why KeyID
can have so many fields appended to it. If in your application there is some chance of
reading a 1-char barcode identical to KeyID, the way you can distinguish between
the two is to enable the Code ID: The KeyID is the only 1-character long EAN 8
code.
Refer to par. 5.3 for a compete description of the optional message fields in square
brackets.
The default characters associated with each key (KeyID) are shown in the following
table:
Default Key Identifiers
Key
KeyID
(left) Key
'<'
ENTER
(center) Key
'='
(right) Key
'>'

Table of Contents

Other manuals for Datalogic PowerScan M8300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic PowerScan M8300 and is the answer not in the manual?

Datalogic PowerScan M8300 Specifications

General IconGeneral
Scanner type1D
Maximum range30 m
Read rate (max)40 reads/s
Yaw reading angle-60 - 60 °
Decoding standardsGS1 DataBar, Code 16K, Code 49, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional
Tilt reading angle-20 - 20 °
Pitch reading angle-55 - 55 °
Operating time240 min
Dimensions (WxDxH)114 x 69 x 210 mm
BluetoothNo
Operating frequency910 MHz
Input voltage10 - 30 V
Battery capacity2150 mAh
Power requirements0.33 - 1A
Number of reads per charge60000
CertificationIP64, China RoHS, EU RoHS, CDRH Class II, IEC 60825-1 Class 2
Keys quantity3 keys
Product colorBlack, Yellow
LED indicatorsCharging, Power
Display resolution32 x 96 pixels
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)0 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight393 g

Related product manuals