Datalogic PowerScan M8300

Enter Configuration
Exit and Save Configuration
Ì$+;Î
RS-232
Ì$-?Î
45
RX TIMEOUT
timeout control in reception from Host
ÌCL5Î
Read 2 numbers from the table where:
00 = TIMEOUT disabled
01-99 = TIMEOUT from .1 to 9.9 seconds
 rx timeout 5 seconds
See par. 5.1.4 for details.
SERIAL TRIGGER LOCK
 disabled
ÌCR0qÎ
enable and select characters
ÌCR1tÎ
Read 2 characters from the Hex/Numeric table in the range 00-FE where:
− First Character enables device trigger
− Second Character inhibits device trigger until the first character is received again.

