Need help?Do you have a question about the Datalogic QuickScan i QD2100 and is the answer not in the manual?
General| Scan speed | 8 sec/page |
|---|---|
| Wavelength | 610 nm |
| Tilt angle range | -65 - 65 ° |
| Decoding standards | 1D / GS1 DataBar China Post GS1 DataBar Expanded/ Stacked/ Stacked Omnidirectional |
| Dimensions (WxDxH) | 170 x 66 x 71 mm |
| Standard interfaces | RS-232, USB, Keyboard wedge |
| Input voltage | 5 V |
| Power consumption | 340 mA |
| Product color | White |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Weight | 121.9 g |
|---|
Provides contact information and resources for obtaining technical assistance and product support.
Guides users through connecting and configuring the imager with their host system.
Explains how to configure the imager's features using programming bar codes or software.
Details how to select and configure the appropriate interface type for system connection.
Sets the time delay between label reads to prevent double reads.
Covers various scanning parameters like Scan Mode, timeouts, and active time settings.
Sets the data transmission rate to match the host device requirements.
Manages ACK/NAK protocol, characters, timeout, retry, and error handling.
Configures global prefixes, suffixes, and AIM IDs for scanned data.
Allows customizable codes (up to three ASCII characters) to identify symbology types.
Configuration options for UPC-A, UPC-E, EAN 13, EAN 8, and global UPC/EAN settings.
Configuration options for GS1 DataBar Omnidirectional, Expanded, and Limited symbologies.
Covers configuration options for various common symbologies like Code 39, Code 128, I2of5, Codabar, etc.
To Next Page
