Datamax MP Compact4 Mark II - Page 95

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 83
Value Parameter Interpretation Default Value
*
I xxx.xxx.xxx.xxx
Is the IP Address, where:
x = 0 to 9
192.168.010.026
m x
Is MTU packet size, where:
x = a range, 512 – 65515, in bytes
1500
N xxx.xxx.xxx.xxx
Is the SNMP Trap Address, where:
x = 0 to 9
000.000.000.000
P xxxx
Is the destination Port Number, where:
x = 0 to 9
9100
S xxx.xxx.xxx.xxx
Is the Subnet Mask, where:
x = 0 to 9
255.255.255.000
T a
Is SNMP enable, where a:
Y = Enable
N = Disable
Y
U xxx.xxx.xxx.xxx
Is the WINS2 Address, where:
x = 0 to 9
000.000.000.000
w a
Is WiFi enable, where a:
Y = Enable
N = Disable
N
W xxx.xxx.xxx.xxx
Is the WINS1 Address, where:
x = 0 to 9
000.000.000.000
X a
Is Telnet enable, where a:
Y = Enable
N = Disable
N
Y xxx.xxx.xxx.xxx
Is the DNS1 Address, where:
x = 0 to 9
000.000.000.000
K a
Is TCP Keep Alive enable, where a:
Y = Enable
N = Disable
N
(continued)