6/ Repair Procedures
1503-0151-000 5/26/0 6-5
1. Cable that connects the ventilator to the anesthesia machine SIB.
2. Power cord connector to ventilator.
3. Power cord retainer bracket.
4. Power cord retainer bracket mounting screws.
5. Ventilator mounting shelf, slides into anesthesia machine shroud.
6. Power cord, plugs into the anesthesia machine electrical outlet box.
7. Ventilator shelf mounting screws, mounts the shelf to the bottom of the ventilator
chassis.
8. Ventilator shroud. Mounts onto the top shelf and has a front bezel
Figure 6-4
Non-integrated 7900 ventilator and mounting tray insertion
1. Remove the dual hose for drive/return gas connecting the bellows to the
exhalation valve.
2. Remove the exhaust hose from the exhalation valve manifold.
3. Loosen the thumb screws (2) which hold the ventilator mounting tray in the key
slots of the shroud.
To Next Page
Loading...
