DayTronic System 10 - 3.C Special V-Card functions

3.C SPECIAL “V-CARD” FUNCTIONS
3.C.1 INSTALLATION OF OPTIONAL “V CARDS”
a. DataPAC Models 10K3, 10K6, and 10K7
b. DataPAC Models 10K6E and 10K8
3.C.2 EXTENDED VIDEO MEMORY (WITHOUT BARGRAPH):
MODEL 10VMO500
3.C.3 FORMATTABLE PRINTER OUTPUT: MODEL 10VFO132
a. Introduction
b. Printer Interface Setup
1. Connections
2. Setting RS-232-C Interface Protocol:
PBR Command
3. Setting Intercharacter Delay:
ICD Command
4. Setting Printer Type:
PTY Command
c. Printing Video Pages
1. Printing the Page Directory: CAT Command
2. The
PRINT PAGE (PRI) Command
a. Printing a Selected Video Page or Range of Pages
b. Printing the Currently Displayed Video Page
c. Transmitting a Carriage Return
3. Clearing a "Queue" of Video Pages:
CLQ Command
d. Formatting of Page Printouts
1. Specifying "End of Line" Control Character(s): EOL Command
2. Specifying "End of Page" Control Character(s):
EOP Command
3. Suppression of Blank Lines:
BLS Command
e. Printing Channel Data
1. The PRINT CHANNEL DATA (PRT) Command
2. Specifying Default Header and Tailer Pages:
DHT Command
f. Formatting of Channel-Data Printouts
1. Setting Channels Per Line: CPL Command
2. Defining Format "Template":
TMP Command
3.C.4 VIDEO BARGRAPH DISPLAY: MODEL 10VGM500
a. Introduction
b. Setting "BVS" Number: BVS Command
c. Establishing a Bargraph in a Video Page Format
d. Other Bargraph Operations
1. Viewing and Modifying Bargraph Parameters
2. Deleting a Bargraph
3. Setting Visual Effects for a Bargraph
4. Printout of Bargraph Pages:
PTY and PRI Commands
xxviii
C ONTENTS